W
wait
Guest
@Holdie
Ich muß passen, leider nicht.
Ich muß passen, leider nicht.
Hast du eventuell noch 6 auf 8Pin Adapter rumliegen?
Mal RAID komplett raus und nur die Gpu's ran. Hab ich getestet "fail"
Nicht das der Riser einen weg hat. Oder Riser über die erste Gpu testen. Werde ich mal testen, aber heute schaffe ich es leider nicht mehr
PCH SLOT4 PCI-E 2.0 X4(IN X8)
CPU SLOT5 PCI-E 3.0 X8
CPU SLOT6 PCI-E 3.0 X8(IN X16)
Use Jumpers IC1/IC2 to enable PCI SMB
SMB (System Management Bus) support
to improve system management for the
PCI slots. See the table on the right for
jumper settings.
Detect Non-Compliance Device
Select Enabled for the AMI BIOS will automatically detect a PCI-E device that
is not in compliance. The options are Enabled and
Disabled
.
Program PCI-E ASPM After OpROM
PCI-E ASPM,
Active State Power Management for PCI-Express slots, is a power
management protocol used to manage power consumption of serial-link devices
installed on PCI-Exp slots during prolonged off-peak time. If this item is set to
Enabled, PCI-E ASMP will be programmed after OpROM. If this item is set to
Disabled, the PCI-E ASPM will be programmed before OpROM. The options are
Enabled and Disabled.
.
PEG0-ASPM/PEG1-ASPM
This feature configures the ASPM (Active State Power Management) settings
for the graphics devices installed on PCI-E Slot 0, Slot 1, or Slot2. The options
are Disabled, Auto, ASPM L0s, ASPM L1s, and ASPM L0sL1.